SAKIGAKE MIGAKIJUKU | Scratch Eraser Compound | Small Scratces | PROSTAFF | JAPAN | S189

Polish away scratches and dullness!

Intellectual property rights acquired

Download high resolution

High resolution1

High resolution2

High resolution3

Characteristic

This scratch-removing kit contains a compound to erase bothersome scratches.
It polishes away scratches on door handles, fenders, etc., and removes dullness from resin door visors and resin headlights, restoring their shine.

This abrasive is equivalent to #6000 grit sandpaper.
It effectively removes scratches.

It finishes the painted surface while removing scratches, giving it a brilliant shine.

Ideal for surface preparation: Perfect for surface preparation before wax or coating application. Available in all colors.

We recommend a step-by-step application process: first using the minor scratch remover (second son), then the finishing touch (third son).

For a beautiful finish, using the Three Brothers series in stages will provide a better scratch removal effect and shine.
① For rough scratches: Use the eldest brother → second brother → third brother.
② For minor scratches: Use the second brother → third brother.
③ For very fine scratches: Use the third brother. The product comes with a full set of accessories, including a dedicated PE sponge and a microfiber cloth.

* Depending on the severity of the scratches, they may not be completely removed.
* This product is an abrasive (compound), so it will also remove the coating film.
[Removes dirt all at once!]
Along with removing scratches, it also cleans water stains, rain spots, and water spots that have just landed.
*Not effective on water spots where the paint has been eroded (indented).
[How to use 1]
Wash with water!
Wash away any sand or mud from the body and wipe off the water.

*Leaving sand or mud behind can cause scratches.
[How to Use 2]
Polish and remove! Shake the container well, apply about 1 cm of the liquid to the sponge side (yellow), and lightly polish in one direction (vertical or horizontal).

*As a guideline, work on an area of about 15-20 cm square at a time.

*Check the condition of the area being worked on as you go.
[How to Use 3]
Wipe it off!
Wipe it off with the included microfiber cloth before the liquid dries. After use, close the cap and wash your hands with soap.

*Leaving it on for a long time may make it difficult to wipe off and may cause stains or unevenness.
*If it is difficult to wipe off, wipe it off with a towel that has been dampened with water and wrung out tightly.